Model No: Monel 400 Plate

Monel 400 Nickel Alloy Plate - UNS N04400

Monel 400 is a nickel-copper alloy (about 67% Ni - 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.

Delivery :

FOB

minimum order :

100 kilograms

Supply Ability :

5000Tonkilograms / Month

Stock Time :

7-10Day

Country of Origin :

CHINA

Quantity :

Contact Now

Monel 400 is a nickel-copper alloy (about 67% Ni - 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Monel 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions.

Other Designations

Some of the other designations that are used to denote MONEL 400 alloy are as below:

AMS 4574
AMS 4675
AMS 4731
ASTM B163
ASTM B165
ASTM F96
UNS N04400

Applications

Marine engineering
Chemical and hydrocarbon processing equipment
Gasoline and freshwater tanks
Crude petroleum stills
De-aerating heaters
Boiler feed water heaters and other heat exchangers
Valves, pumps, shafts, fittings, and fasteners
Industrial heat exchangers
Chlorinated solvents
Crude oil distillation towers

Chemical Composition

The chemical composition of MONEL 400 alloy is given in the following table.

Element	Content (%)
Nickel, Ni	Remainder
Copper, Cu	28-34
Iron, Fe	2.5 max
Manganese, Mn	2 max
Silicon, Si	0.5 max
Carbon, C	0.3 max
Sulphur, S	0.024

Physical Properties

The following table discusses the physical properties of MONEL 400 alloy.

Properties	Metric	Imperial
Density	8.8 gm/cm³	0.318 lb/in³

Mechanical Properties

The mechanical properties of MONEL 400 alloy are tabulated below.

Properties	Metric	Imperial
Tensile strength(annealed)	517-620 MPa	75-90 ksi
Yield strength	172-345 MPa	25-50 ksi
Modulus of elasticity	179 GPa	26000 ksi
Poisson’s ratio	0.32	0.32

Typical Mechanical Properties

Material	Form and Condition	Tensile Strength MPa	Yield Strength (0.2% Offset) MPa	Elongation (%)	Hardness Rockwell B
Alloy 400	Annealed Rod and Bar	517-620	172-345	60-35	60-80
Alloy 400	Hot Rolled Plate Annealed	482-586	193-345	50-35	60-76
Alloy 400	Sheet Annealed	482-586	207-310	45-35	65-80
Alloy 400	Tube Cold drawn Annealed Seamless	482-586	172-310	50-35	75 max

Alloy 400 (UNS N04400) is available in Bar (Round), Tube, Flat Bar, Wire, Billet, Sheet, Plate, Pipe, Forgings. View Stock List, Plate Stock List or contact Sales for further availability.

Main Characteristics

Resistant to seawater and steam at high temperatures
Excellent resistance to rapidly flowing brackish water or seawater
Excellent resistance to stress corrosion cracking in most freshwaters
Particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated
Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations, but is seldom the material of choice for these acids
Excellent resistance to neutral and alkaline salt
Resistance to chloride induced stress corrosion cracking
Good mechanical properties from sub-zero temperatures up to 1020° F
High resistance to alkalis

Annealing

MONEL 400 alloy may be annealed at 926°C (1700°F).

Lork Group is a reputable manufacturer and supplier of high-quality Monel 400 Nickel Alloy Plate - UNS N04400 in China. Renowned for our dedication to excellence, we specialize in producing durable Super Alloy products to meet diverse industrial needs. With a commitment to superior quality, we ensure our bars meet strict standards, making us a trusted choice in the industry.

Contact Lork Group for metal material Solutions

Email: daisy@lorkgroup.com
WhatsApp: + 86 175 1308 1871