Subscribe to our Newsletter
Model No: TA15
TA15 Titanium Alloy
TA15 is a near-α titanium alloy with a nominal composition of Ti-6.5Al-2Zr-1Mo-1V. TA15 titanium alloy not only has excellent thermal stability and weldability but also has good processing performance, which can be prepared into bars, profiles and plates.
Delivery :
FOB
minimum order :
100 kilograms
Supply Ability :
5000Tonkilograms / Month
Stock Time :
7-10Day
Country of Origin :
CHINA
Quantity :
TA15 Titanium Alloy Introduction
TA15 is a near-α titanium alloy with a nominal composition of Ti-6.5Al-2Zr-1Mo-1V. TA15 titanium alloy not only has excellent thermal stability and weldability but also has good processing performance, which can be prepared into bars, profiles and plates. As a medium-high strength titanium alloy, TA15 also has high-temperature endurance, high-temperature creep resistance and can achieve long-term service at 500 °C. Therefore, TA15 has been widely used in the aerospace field, such as the preparation of aircraft engine blades, fuselage structures and so on.
TA15 Titanium Alloy Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
TA15 Titanium Alloy Chemical composition [Mass fraction in %]
| Ti | Al | Zr | Mo | V | Si | C | Fe | O | N | H | Others | Total others |
| Balance | 5.5 – 7.1 | 1.5 – 2.5 | 0.5 – 2.0 | 0.8 – 2.5 | 0.15 | 0.08 | 0.25 | 0.15 | 0.05 | 0.015 | 0.10 | 0.30 |
TA15 Titanium Alloy Properties (Theoretical)
| Compound Formula | Appearance | Melting Point | Tensile Strength | Density |
| TiAlZrMoV | Metallic solid in various forms | N/A | 1080±50 MPa | 2.1-2.4 g/cm3 |
TA15 Titanium AlloyAdded Services
Material Testing:
Lork Group at ensure that all our materials go through strict quality tests before dispatching them to our clients.
- Mechanical Testing Such as Tensile of Area
- Hardness Test
- Chemical Analysis - Spectro Analysis
- Positive Material Identification - PMI Testing
- Flattening Test
- Micro and MacroTest
- Pitting Resistance Test
- Flaring Test
- Intergranular Corrosion (IGC) Test
